M/T Assembly Installation
  1. Connect the steering joint (A) in the their original positions on the pinion shaft (B) by aligning the marks (C). Install the steering joint bolt (D).
  1. Pull the steering joint towerd the column and be sure that it does not come off the pinion shaft. Install the steering cover (E).
  1. Install the steering wheel.
  1. Install the driver's airbag.
  1. Install the battery. Connect the positive (+) cable first, then the negative (−) cable to the battery.
  1. Refill the transsmision fluid.
  1. Shift into the 5th gear. Make sure the transmission does not shift direct into the reverse gear. (Then return to Neutral position, and enable to shift into reverse gear.)
  1. Check the EPS operation and EPS control unit memorize the torque sensor neutral position.
  1. Check the front wheel alignment.
  1. Enter the anti-theft codes for the radio and navigation system, then enter the customer's radio station presets.
  1. Do the power window control unit reset procedure.
  1. Test-drive the vehicle.