DTC Troubleshooting: P19E8 (130-1)
  1. Check for continuity between ECM connector A (44P) terminal No. 32 and clutch actuator subharness 10P connector terminal No. 5.
Is there continuity?
YES -
Remove the clutch actuator assembly, and check for clutch actuator subharness. If the wire harness is OK, substitute a known-good TCM, then recheck. If the symptom/indication goes away with a known-good TCM, replace the original TCM. ■
NO -
Repair an open in the wire between the ECM (A32) and the clutch actuator subharness.■