DTC Troubleshooting: P0910 (162-4)
  1. Change the shift lever from D to N position, then from N to D position, and measure voltage between select actuator motor 6P connector terminal No. 6 and body ground.
Does the voltage change from 0 V (or battery voltage) to battery voltage (or 0 V) depending by the shift lever operation?
YES -
Remove the clutch actuator assembly, and check for change actuator subharness A. If the wire harness is OK, substitute a known-good TCM, then recheck. If the symptom/indication goes away with a known-good TCM, replace the original TCM. ■
NO -
Repair an open in the wire between the TCM and the transmission shift change actuator.■