DTC Troubleshooting: P0909 (162-3)
DTC P0909:
 Transmission Shift Change Actuator Neutral Position Learned Value Out of Range
  1. Turn the ignition switch ON (II).
  1. Clear the DTCs with the HDS.
  1. Do the i-SHIFT System Learning (Static Mode).
  1. Check for DTCs with the HDS.
Is DTC P0909 indicated?
YES -
Go to Step 5 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Turn the ignition switch OFF.
  1. Remove the transmission shift change actuator.
  1. Check the shift actuator and select actuator rods.
Are they good condition?
YES -
Replace the transmission shift change actuator. ■
NO -
Repair the transmission internal failure.■