Front Subframe Side Member Replacement
  1. Remove the front subframe side member (A) mounting bolts (B).
    NOTE: Use the new mounting bolts during reassembly.
  1. Lower the transmission jack slowly until the front subframe has dropped about 30 mm (1.2 in.) from the mounting surface.
  1. RHD type: Remove the steering gearbox from the subframe center member.
  1. Remove the flange bolt (C).
  1. Remove the front subframe center member (D) mounting bolts and nuts.
  1. Remove the front subframe side member from the front subframe center member.