Connect the steering joint (A) in the their original positions on the pinion shaft (B) by aligning the marks (C). Install the steering joint bolt (D).

Pull the steering joint toward the column and be sure that it does not come off the pinion shaft. Install the steering cover (E).

Install the steering wheel.

Install the driver's airbag.

Install the battery. Connect the positive cable first, then the negative cable to the battery.

Install the cowl cover and the cowl panel.

Check the EPS operation and EPS control unit memorize the torque sensor neutral position.

For with HID lamp model: Do the headlight learning procedure.

Check the shift lever and the clutch operation.

Check the front wheel alignment.

Test-drive the vehicle.

Enter the anti-theft codes for the audio or the navigation system, then enter the customer's audio presets, and set the clock.

Do the power window control unit reset procedure.