M/T Assembly Removal
Special Tools Required

Ball Joint Remover, 28 mm
 07MAC-SL00201

Engine support hanger
 AAR-T1256-J00
*
*: This special tool is available from Snap-on Tools    International, LLC.
NOTE: Use fender covers to avoid damaging painted surfaces.
  1. Secure the hood in the wide open position with the support strut.
  1. Remove the cowl cover and the cowl panel.
  1. Make sure you have the anti-theft code for the audio or the navigation system (if equipped), then write down the audio presets. Disconnect the negative cable from the battery first, then disconnect the positive cable. Remove the battery.
  1. Remove the driver's airbag and the steering wheel.
  1. Remove the steering joint cover (A).
  1. Make a mark (B) to the steering joint (C) and pinion shaft (D), then disconnect the steering joint and pinion shaft.
  1. Remove the air cleaner housing.