SIL Troubleshooting
  1. Connect clutch pedal position switch A 2P connector terminal No. 1 and body ground with a jumper wire.
  1. Turn the ignition switch to ON (II).
  1. Check CLUTCH PEDAL POSITION SWITCH A in the DATA LIST with the HDS.
Is ON indicated?
YES -
Go to Step 22 .
NO -
Repair open in the wire between the clutch pedal position switch A and body ground (G401). ■
  1. Turn the ignition switch to LOCK (0), and wait 2 minutes.
  1. Disconnect ECM connector No. 2 (58P).