M/T Limited Slip Differential Check
Operational Check
NOTE: The helical type limited slip differential (LSD) distributes optimum power between the two driving axles according to the difference in torque as demanded by the driving wheels. Under no circumstances should the engine be started with either wheel raised off the ground, such as when adjusting wheel balance or when transporting the vehicle in the event of an accident.
  1. Turn the ignition switch to LOCK (0).
  1. Set the parking brake, and block the rear wheels.
  1. Raise the front of the vehicle, and support it with safety stands in the proper locations.
  1. Shift the transmission into low gear.
  1. Rotate either front wheel by hand, and check that the other wheel rotates in the opposite direction.
  1. Replace the limited slip differential assembly if the opposite front wheel does not rotate, or if you can not spin the front wheels at all.