Front Stabilizer Bar Replacement
  1. Remove the flange bolts and the bushing holders (A), then remove the bushings (B) and the stabilizer bar (C) from the front subframe (D).
    NOTE: Use the new flange bolts during reassembly.
  1. Install the stabilizer bar in the reverse order of removal, and note these items:
    • Note the right and left direction of the stabilizer bar.
    • Align the paint marks (E) on the stabilizer bar with the sides of the bushing.
    • Note the fore/aft direction of the bushing holders.
    • Refer to stabilizer link removal/installation to connect the stabilizer bar to the links.
    • Check the wheel alignment, and adjust it if necessary.