DTC Troubleshooting: U1261 (107-21)
  1. Check for continuity between clutch actuator subharness 10P connector terminal No. 7 (No. 6) * and body ground.
    *: CANL
Is there continuity?
YES -
Substitute a known-good VSA modulator-control unit, then recheck. If the symptom/indication goes away with a known-good VSA modulator-control unit, replace the original VSA modulator-control unit. ■
NO -
Repair an open in the wire between the clutch actuator subharness 10P connector and the VSA modulator-control unit.■