DTC Troubleshooting: P19FF (160-26)
DTC P19FF:
 Clutch Friction Coefficient Learning Value Out of Range
  1. Turn the ignition switch to ON (II).
  1. Clear the DTCs with the HDS.
  1. Start the engine.
  1. Test-drive and change the shift lever from 1st to 6th gear positions.
  1. Check for DTCs with the HDS.
Is DTC P19FF indicated?
YES -
Go to Step 6 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Turn the ignition switch to LOCK (0).
  1. Do the CLUTCH FLUID AIR BLEEDING in the ADJUSTMENT MENU with the HDS.
  1. Do the i-SHIFT System Learning (Static Mode).
  1. Turn the ignition switch to LOCK (0).
  1. Check for DTCs with the HDS.
Is DTC P19FF indicated?
YES -
Go to Step 11 .
NO -
The system is OK at this time.■
  1. Turn the ignition switch to LOCK (0).
  1. Remove the clutch pipe assembly from the clutch actuator.
  1. Do the CLUTCH FLUID FILLING in the ADJUSTMENT MENU with the HDS.
  1. Turn the ignition switch to ON (II).
  1. Check for DTCs with the HDS.
Is DTC P19FF indicated?
YES -
Replace the TCM; R18A2 engine model, L13Z1 engine model. ■
NO -
Check the slave cylinder and release system.■