DTC Troubleshooting: P0914 (162-5)
  1. Check for continuity between shift actuator motor 6P connector terminal No. 5 and change actuator subharness B 8P connector terminal No. 2 (R18A2 engine model) or TCM connector B9 (L13Z1 engine model).
Is there continuity?
YES -
  • R18A2 engine model: remove the clutch actuator assembly, and check for change actuator subharness A. If the wire harness is OK, update the TCM if it does not have the latest software or substitute a known-good TCM, then recheck. If the symptom/indication goes away with a known-good TCM, replace the original TCM.
  • L13Z1 engine model: update the TCM if it does not have the latest software or substitute a known-good TCM, then recheck. If the symptom/indication goes away with a known-good TCM, replace the original TCM. ■
NO -
Repair an open in the wire of the change actuator subharness B (R18A2 engine model) or change actuator subharness A (L13Z1 engine model).■