M/T Assembly Removal
Special Tools Required

Engine support hanger
 AAR-T1256-J00
*
*: This special tool is available from Snap-on Tools    International, LLC.
NOTE: Use fender covers to avoid damaging painted surfaces.
  1. Secure the hood in the wide open position with the support strut.
  1. Remove the cowl cover and the cowl panel.
  1. Make sure you have the anti-theft code for the audio or the navigation system (if equipped), then write down the audio presets. Disconnect the negative cable from the battery first, then disconnect the positive cable. Remove the battery.
  1. Remove the battery base.
  1. Remove the intake air duct.
  1. Remove the air cleaner housing.
  1. Remove the clutch line bracket (A) and the slave cylinder (B), then carefully move the slave cylinder out of the way to avoid bending the clutch line.
    NOTE:
    • Do not disconnect the clutch line joints.
    • Do not press the clutch pedal after the slave cylinder has been removed.