Clutch Replacement
  1. Torque the mounting bolts in a crisscross pattern. Tighten the bolts in several steps to prevent warping the diaphragm spring.
    PRESSURE PLATE MOUNTING BOLT TORQUE:
    25 N·m (2.6 kgf·m, 19 lbf·ft)

  1. Remove the ring gear holder (A), and the clutch alignment tool set (B).
  1. Make sure the diaphragm spring fingers are all the same height.
  1. Do the release bearing inspection, and replace if it necessary.
  1. Install the transmission.