M/T Assembly Installation
  1. Connect the back-up light switch connector (A), then install the harness clips (B).
  1. Install the transmission shift change actuator.
  1. Install the clutch actuator (TCM).
  1. Install the air cleaner housing.
  1. Install the air intake duct.
  1. Install the battery. Connect the positive cable first, then the negative cable to the battery.
  1. Install the cowl cover and the cowl panel.
  1. Do the i-SHIFT system learning (static mode).
  1. Check the clutch operation.
  1. Check the front wheel alignment.
  1. Test-drive the vehicle.
  1. Enter the anti-theft code for the audio or the navigation system, then enter the customer's audio presets, and set the clock.
  1. Perform the power window control unit reset procedure.