M/T Assembly Removal
Special Tools Required

Engine support hanger
 AAR-T1256-J00
*
*: This special tool is available from Snap-on Tools    International, LLC.
NOTE: Use fender covers to avoid damaging painted surfaces.
  1. Secure the hood in the wide open position with the support strut.
  1. Remove the cowl cover and the cowl panel.
  1. Make sure you have the anti-theft code for the audio or the navigation system (if equipped), then write down the audio presets. Disconnect the negative cable from the battery first, then disconnect the positive cable. Remove the battery.
  1. Remove the air intake duct.
  1. Remove the air cleaner housing.
  1. Remove the clutch actuator (TCM).
  1. Remove the transmission shift change actuator.
  1. Disconnect the back-up light switch connector (A), then remove the harness clips (B).