Intake Manifold/Chamber Assembly Removal and Installation

Exploded View
Removal
  1. Remove the under-cowl panel.
  1. Remove the air cleaner housing assembly.
  1. Remove the engine wire harness connectors and wire harness clamps from the intake manifold chamber:
    • Throttle actuator connector
    • Manifold absolute pressure (MAP) sensor connector
    • Exhaust gas recirculation (EGR) valve connector
  1. Remove the brake booster vacuum hose (A) and the harness clamp (B).
  1. Remove the water bypass hose from the clamp (C).