DLC Circuit Troubleshooting - PGM-FI System

  1. Check for continuity between ECM connector terminal A9 and body ground.
Is there continuity?
YES -
Repair short in the wire between the ECM (A9) and each part. Also replace the No. 9 IGP (15 A) fuse.■
NO -
Replace the under-hood fuse/relay box. Also replace the No. 9 IGP (15 A) fuse.■
  1. Check the No. 2 FUEL PUMP (15 A) fuse in the under-dash fuse/relay box.
Is the fuse OK?
YES -
Go to Step 54 .
NO -
Go to Step 44 .
  1. Remove the blown No. 2 FUEL PUMP (15 A) fuse in the under-dash fuse/relay box.