Engine Removal
  1. Remove the transmission mounting bolt and nuts (A).
  1. Remove the ground cable (B).
  1. Check that the engine/transmission is completely free of vacuum hoses, fuel hoses, coolant hoses, and electrical wiring.
  1. Slowly lower the engine/transmission assembly about 150 mm (6 in.). Check once again that all the hoses and the electrical wiring are disconnected and free from the engine/transmission, then lower it all the way.
  1. Disconnect the chain hoist from the engine/ transmission assembly.
  1. Raise the vehicle all the way, and remove the engine/transmission assembly from under the vehicle.