Cylinder Head Rocker Arm Assembly Installation
  1. Tighten each bolts two turns at a time in sequence.
    NOTE: Remove the rubber bands (A) from the intake rocker arms.
    Specified Torque
    6 x 1.0 mm
    (1)−(10):
    15 N·m (1.5 kgf·m, 11 lbf·ft)
    (11):
    9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)

  1. Adjust the valve clearance.
  1. Install the cylinder head cover.