Camshaft Sprocket Installation
  1. Hold the crankshaft pulley and set the socket wrench (A) on the camshaft sprocket bolt.
  1. Turn the camshaft clockwise to compress the cam chain tensioner, then remove the 6 x 1.0 mm bolt (B).
    NOTE:
    • Turning torque should not exceed 56 N·m (5.7 kgf·m, 41 lbf·ft), when turning the camshaft.
    • Do not turn the camshaft counterclockwise.
  1. Install the maintenance bolt (C) with a new washer (D).