Camshaft Sprocket Removal
  1. Hold the crankshaft pulley and set the socket wrench (A) on the camshaft sprocket bolt.
  1. Remove the maintenance bolt (B), and turn the camshaft clockwise to compress the cam chain tensioner, then install the 6 x 1.0 mm bolt (C) in the bolt hole (D) on the engine block through the maintenance hole and cam chain tensioner (E).
    NOTE:
    • Turning torque should not exceed 56 N·m (5.7 kgf·m, 41 lbf·ft), when turning the camshaft.
    • Do not turn the camshaft counterclockwise.