Camshaft Inspection
  1. Remove the camshaft sprocket.
  1. Remove the rocker arm assembly, then disassemble the rocker arm.
  1. Put the rocker shaft holder bridge/rocker shaft holders on the cylinder head, then tighten the bolts to the specified torque.
    Specified Torque
    6 x 1.0 mm
    (1)−(10):
    15 N·m (1.5 kgf·m, 11 lbf·ft)
    (11):
    9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)

  1. Seat the camshaft by pushing it toward the rear of the cylinder head.