|
PGM-FI main relay 1, Ignition coil relay, PGM-FI subrelay, ETCS relay, Rear window defogger relay
-
Disconnect the under-hood fuse/relay box connector D (20P).
-
At the under-hood fuse/relay box side, do the following test.
PGM-FI main relay 1:
-
Connect the No. 16 terminal and body ground. There should be battery voltage between the No. 5 terminal and body ground.
-
Disconnect the No. 16 terminal from body ground. There should be no voltage between the No. 5 terminal and body ground.
Ignition coil relay:
-
Connect the No. 16 terminal and body ground. There should be battery voltage between the No. 18 terminal and body ground.
-
Disconnect the No. 16 terminal from body ground. There should be no voltage between the No. 18 terminal and body ground.
PGM-FI subrelay:
-
Connect the No. 20 terminal and body ground. There should be battery voltage between the No. 9 terminal and body ground.
-
Disconnect the No. 20 terminal from body ground. There should be no voltage between the No. 9 terminal and body ground.
ETCS relay:
-
Connect power and ground between the No. 15 and the No. 17 terminals. There should be battery voltage between the No. 6 terminal and body ground.
-
Disconnect power and ground from the No. 15 and the No. 17 terminals. There should be no voltage between the No. 6 terminal and body ground.
Rear window defogger relay:
-
Connect power and ground between the No. 4 and the No. 14 terminals. There should be battery voltage between the No. 3 terminal and body ground.
-
Disconnect power and ground from the No. 4 and the No. 14 terminals. There should be no voltage between the No. 3 terminal and body ground.
|