|
ISV relay, Fuel heater relay, PTC 1 relay, PTC 2 relay, PTC 3 relay
-
Disconnect the under-hood fuse/relay box connector J (10P) and K (5P).
-
At the under-hood fuse/relay box side, do the following test.
ISV relay:
-
Connect power to the J No. 9, and ground to the J No. 3 terminals. There should be battery voltage between the J No. 4 terminal and the body ground.
-
Disconnect power from the J No. 9, and ground from the J No. 3 terminals. There should be no voltage between the J No. 4 terminal and the body ground.
Fuel heater relay:
-
Connect power to the J No. 8, and ground to the J No. 7 terminals. There should be battery voltage between the K No. 5 terminal and the body ground.
-
Disconnect power from the J No. 8, and ground from the J No. 7 terminals. There should be no voltage between the K No. 5 terminal and the body ground.
PTC 1 relay:
-
Connect power to the J No. 1, and ground to the J No. 10 terminals. There should be battery voltage between the K No. 4 terminal and the body ground.
-
Disconnect power from the J No. 1, and ground from the J No. 10 terminals. There should be no voltage between the K No. 4 terminal and the body ground.
PTC 2 relay:
-
Connect power to the J No. 1, and ground to the J No. 6 terminals. There should be battery voltage between the K No. 3 terminal and the body ground.
-
Disconnect power from the J No. 1, and ground from the J No. 6 terminals. There should be no voltage between the K No. 3 terminal and the body ground.
PTC 3 relay:
-
Connect power to the J No. 1, and ground to the J No. 2 terminals. There should be battery voltage between the K No. 2 terminal and the body ground.
-
Disconnect power from the J No. 1, and ground from the J No. 2 terminals. There should be no voltage between the K No. 2 terminal and the body ground.
|