Wheel Bolt Replacement
Special Tools Required

Ball joint remover, 28 mm
 07MAC-SL00201
  • Do not use a hammer or air or electric impact tools to remove and install the wheel bolts.
  • Be careful not to damage the threads of the wheel bolts.
  1. Raise the vehicle, and support it with safety stands in the proper locations.
  1. Remove the brake disc or disc/drum: front, rear.
  1. Separate the wheel bolt (A) from the hub (B) using the ball joint remover (C), and keep the jaw (D) of ball joint remover vertical against the wheel bolt.
    NOTE:
    • When the angle of the remover against the wheel bolt is inclined readjust the ball joint remover with turning the head (E) of the adjusting bolt (F).
    • Before installing the new wheel bolt, clean the mating surface on the bolt and the hub.