Steering Gearbox Removal and Installation
Installation
  1. Center the steering rack within its stoke.
  1. Place the steering gearbox on the front subframe.
  1. Position the cutout (A) on the mounting cushion (C) as shown, and install it on the gearbox securely.
    NOTE:
    • Make sure to align the tab (D) on the mounting cushion with paint mark (E) on the steering gearbox.
    • Apply water on the mounting cushion.
  1. Align the tab on the mounting cushion with the locating hole (F) on the mounting bracket B, then install the stiffener plate (G) and new mounting bolts (H) loosely.
  1. Install the mounitng bolts (I) and (J) loosely.
    NOTE: Make sure to avoid interference with the subframe and the mounting bracket B.
  1. Tighten the mounting bolts (H) to the specified torque.
  1. Tighten the mounting bolt (I) to the specified torque.
  1. Tighten the mounting bolts (J) to the specified torque.

LHD:
RHD: