DTC Troubleshooting: P19FC (160-23)
DTC P19FC:
 Shift Change Actuator Position Learning Not Completed
NOTE:
  • DTC P19FC is stored when the Shift Change Actuator Position Learning is incomplete.
  • Make sure the battery is fully charged.
  1. Turn the ignition switch ON (II).
  1. Clear the DTCs with the HDS.
  1. Do the i-SHIFT System Learning (Static Mode).
  1. Check for DTCs with the HDS.
Is DTC P19FC indicated?
YES -
Go to Step 3 , and repeat the steps. If DTC P19FC is stored again after doing the i-SHIFT System Learning (Static Mode), check the repair error, or there is a problem in a replacement part.
NO -
Intermittent failure, the system is OK at this time.■