DTC Troubleshooting: P19FB (160-22)
DTC P19FB:
 Clutch Contact Position 1 and 2 Learning Not Completed
NOTE: If the Clutch Contact Position 1, 2 Learning is incomplete after replacing the clutch disc, repeat the Clutch Contact Position 1, 2 Learning several times. If the Clutch Contact Position 1, 2 Learning is still incomplete, check the clutch disc installation.
  1. Turn the ignition switch ON (II).
  1. Clear the DTCs with the HDS.
  1. Do the i-SHIFT System Learning (Static Mode).
  1. Check for DTCs with the HDS.
Is DTC P19FB indicated?
YES -
Go to Step 5 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Turn the ignition switch OFF.
  1. Do the CLUTCH FLUID AIR BLEEDING in the ADJUSTMENT MENU with the HDS.
  1. Do the i-SHIFT System Learning (Static Mode).
  1. Check for DTCs with the HDS.
Is DTC P19FB indicated?
YES -
Go to Step 7 and repeat the steps.
NO -
Clutch Contact Position 1, 2 Learning is complete.■