DTC Troubleshooting: P19FA (160-21)
DTC P19FA:
 Clutch Contact Position Adaptation Condition Error
  1. Turn the ignition switch ON (II).
  1. Clear the DTCs with the HDS.
  1. Start the engine, and wait for a second.
  1. Check for DTCs with the HDS.
Is DTC P19FA indicated?
YES -
Go to Step 5 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Check the ENGINE TORQUE DISTURBANCE SIGNAL in the DATA LIST with the HDS.
Does it indicate ACTIVE more than 10 minutes?
YES -
Go to Step 6 .
NO -
Intermittent failure, the system is OK at this time.■
  1. Check for Fuel and Emissions systems DTCs with the HDS.
Are any Temporary DTCs or DTCs indicated?
YES -
Go to the indicated DTC's troubleshooting.
NO -
Electrical load change is continuing. Do the i-SHIFT System Learning (Static Mode) and the i-SHIFT System Learning (Dynamic Mode). ■