Steering Wheel Upshift (+) Switch Test
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before performing repair or service.
  1. Remove the steering wheel.
  1. Check the steering wheel upshift (+) switch for continuity between steering switch harness 20P connector terminals No. 8 and No. 10.
    There should be continuity while pressing the steering wheel upshift (+) switch, and no continuity when the switch is released.
  1. Steering wheel upshift (+) switch test has finished if the test result is OK.
    If the switch works incorrectly at the 20P connector, test the switch at the switch connector.