Towing
  1. Remove the cover (A) from the front bumper.
  1. Remove the towing hook from the tool case in the luggage area.
  1. Screw in the towing hook (B), and tighten it securely by hand.
Wheel Lift Equipment − The tow truck uses two pivoting arms that go under the tyres (front or rear) and lift them off the ground. The other two wheels remain on the ground.
Sling-type Equipment − The tow truck uses metal cables with hooks on the ends. These hooks go around parts of the frame or the suspension and the cables lift that end of the vehicle off the ground. The vehicle's suspension and body can be seriously damaged if this method of towing is attempted.
If the vehicle cannot be transported by a flat-bed, it should be towed with the front wheels off the ground. If the vehicle is damaged, the vehicle must be towed with the front wheels on the ground, do the following:
Manual Transmission
  • Release the parking brake.
  • Shift the transmission in neutral.
  • Leave the ignition switch in the ACCESSORY (I) position so the steering wheel does not lock.
  • Make sure all accessories are turned off to minimize battery current draw.
It is best to tow the vehicle no farther than 80 km (50 miles), and keep the speed below 55 km/h (35 mph).
  • Improper towing preparation will damage the transmission. Follow the above procedure exactly. If you cannot shift the transmission or start the engine, the vehicle must be transported on the flat-bed.
  • Trying to lift or tow the vehicle by the bumpers will cause serious damage. The bumpers are not designed to support the vehicle's weight.