Engine Removal
Special Tools Required

Sub hanger stay
 07MAK-PY30100

Engine tilt hanger set
 07KAK-SJ40101

Engine hanger stay
 07KAK-SJ40200
These tools use only for except EU models.
NOTE:
  • Use fender covers to avoid damaging painted surfaces.
  • To avoid damaging the wiring and terminals, unplug the wiring connectors carefully while holding the connector portion.
  • Mark all wiring and hoses to avoid misconnection. Also, be sure that they do not contact other wiring or hoses, or interfere with other parts.
  1. Secure the hood in the wide open position (support rod in the lower hole).
  1. Relieve fuel pressure.
  1. Disconnect the negative cable from the battery, then disconnect the positive cable.
  1. Remove the battery.
  1. Remove the under-cowl panel.