Remove the rocker arm assembly.

Put the rocker shaft holders, camshaft, and camshaft holders on the cylinder head, then tighten the bolts in sequence to the specified torque.

NOTE: If the engine does not have bolt (21), skip it and continue the torque sequence.

8 x 1.25 mm

22 N·m (2.2 kgf·m, 16 lbf·ft)

6 x 1.0 mm

12 N·m (1.2 kgf·m, 8.7 lbf·ft)

6 x 1.0 mm Bolts:

(21), (22), (23)

Seat the camshaft by pushing it away from the camshaft pulley end of the cylinder head.