Water Pump Replacement
  1. Remove the drive belt.
  1. Drain the engine coolant.
  1. Remove the drive belt auto-tensioner.
  1. Remove the oil cooler joint pipe (A), then remove the seven bolts securing the water pump. Remove the water pump (B).
  1. Inspect, and clean the O-ring groove and mating surface with the water passage.
  1. Install the water pump with new O-rings (C) in the reverse order of removal.
  1. Clean up any spilled engine coolant.
  1. Install the drive belt auto-tensioner.
  1. Refill the radiator with engine coolant, and bleed the air from the cooling system with the heater valve open.