Radiator and A/C Condenser Fan Low Speed Circuit Troubleshooting
  1. Connect the A/C condenser fan 2P connector terminal No. 1 to body ground with a jumper wire.
  1. Turn the ignition switch ON (II), then set the A/C button and fan control switch ON.
Does the A/C condenser fan run?
YES -
Go to Step 23 .
NO -
Replace the A/C condenser fan motor. ■
  1. Set the A/C button and fan control switch OFF, then turn the ignition switch OFF.
  1. Disconnect the jumper wire.
  1. Remove the fan control relay from the under-hood fuse/relay box, and test it.
Is the relay OK?
YES -
Go to Step 26 .
NO -
Replace the fan control relay .■
  1. Turn the ignition switch ON (II), then set the A/C button and fan control switch ON.