DTC Troubleshooting: U0107 (207)
  1. Check for continuity between ECM connector No. 1 terminals No. 71 * , No. 95 and body ground individually.
Is there continuity?
YES -
Go to Step 26 .
NO -
Repair open in the wire between the intake shutter valve and ECM connector No. 1 terminal No. 71 * (No. 95), then go to Step 33 .
  1. Substitute a known-good intake shutter valve.
  1. Reconnect ECM connector No. 1 (96P).
  1. Turn the ignition switch ON (II).
  1. Clear the DTC with the HDS.
  1. Start the engine.
  1. Check for Temporary DTCs or DTCs with the HDS.
Is DTC U0107 indicated?
YES -
Go to Step 38 .
NO -
Replace the original intake shutter valve, then go to Step 33 .
  1. Turn the ignition switch OFF.
  1. Reconnect all connectors.
  1. Turn the ignition switch ON (II).
  1. Reset the ECM with the HDS.
  1. Start the engine.
  1. Check for Temporary DTCs or DTCs with the HDS.
Is DTC U0107 indicated?
YES -
Check for poor connections or loose terminals at the intake shutter valve and the ECM, then go to Step 1 .
NO -
Troubleshooting is complete. If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC's troubleshooting.■
  1. Reconnect all connectors.
  1. Update the ECM if it does not have the latest software, or substitute a known-good ECM.
  1. Start the engine.
  1. Check for Temporary DTCs or DTCs with the HDS.
Is DTC U0107 indicated?
YES -
Check for poor connections or loose terminals at the intake shutter valve and the ECM. If the ECM was updated, substitute a known-good ECM, then go to Step 40 . If the ECM was substituted, go to Step 1 .
NO -
If the ECM was updated, troubleshooting is complete. If the ECM was substituted, replace the original ECM. If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC's troubleshooting.■