DTC Troubleshooting: U0107 (207)
  1. Turn the ignition switch ON (II), and measure voltage between intake shutter valve 10P connector terminal No. 8 and body ground within 1 second.
Is there battery voltage?
YES -
Go to Step 21 .
NO -
Go to Step 12 .
  1. Turn the ignition switch OFF.
  1. Test the ISV control relay.
Is the ISV control relay OK?
YES -
Go to Step 14 .
NO -
Replace the under-hood fuse/relay box, then go to Step 33 .
  1. Disconnect the under-hood fuse/relay box connector J (10P).