DTC Troubleshooting: P2017 (178)
  1. Check for continuity between ECM connector No. 1 terminal No. 16 and body ground.
Is there continuity?
YES -
Go to Step 26 .
NO -
Repair open in the wire between the IMRC valve position sensor and ECM connector No. 1 terminal No. 16, then go to Step 21 .
  1. Turn the ignition switch OFF, and wait 1 minute.
  1. Remove the jumper wire from the IMRC valve position sensor 3P connector.
  1. Disconnect ECM connector No. 1 (96P).