DTC Troubleshooting: P0339 (4)
DTC P0339:
 CKP Sensor Intermittent Interruption
NOTE: Before you troubleshoot, record all freeze data and review the general troubleshooting information.
  1. Turn the ignition switch ON (II).
  1. Clear the DTC with the HDS.
  1. Start the engine. If engine does not start, keep cranking 10 seconds.
  1. Check for Temporary DTCs or DTCs with the HDS.
Is DTC P0339 indicated?
YES -
Go to Step 5 .
NO -
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the CKP sensor and the ECM.■
  1. Turn the ignition switch OFF.
  1. Check for poor or loose connections and terminals at the following:
    • CKP sensor
    • ECM
    • Engine ground
    • Body ground
Are the connections and terminals OK?
YES -
Go to Step 7 .
NO -
Repair the connectors or terminals, then go to Step 15 .
  1. Disconnect the CKP sensor 3P connector.
  1. Disconnect ECM connector No. 1 (96P).
  1. Connect CKP sensor 3P connector terminal No. 1 to body ground with a jumper wire.