M/T Reverse Lockout System Circuit Troubleshooting
  1. Start the engine, and check the Malfunction Indicator Lamp (MIL).
    NOTE: DTC P0045, P0403, P2008, and P245A is indicated by circuit open.
Does the MIL come on?
YES -
Troubleshoot the DTC, and recheck.■
NO -
Go to Step 2 .
  1. Turn the ignition switch OFF.
  1. Disconnect the reverse lockout solenoid 2P connector.
  1. Turn the ignition switch ON (II).
  1. Measure the voltage between the reverse lockout solenoid 2P connector terminal No. 2 and body ground.
Is there battery voltage?
YES -
Go to Step 6 .
NO -
Repair open in the wire between the PGM-FI main relay 2 and reverse lockout solenoid 2P connector terminal No. 2.■
  1. Turn the ignition switch OFF.