VSA System Symptom Troubleshooting - ABS indicator, brake system indicator, and VSA indicator do not go off at same time
ABS indicator, brake system indicator, and VSA indicator do not go off at same time
  1. Turn the ignition switch OFF.
  1. Check the No. 4 (7.5 A) fuse in the under-dash fuse/relay box.
Is the fuse blown?
YES -
Install a new No. 4 (7.5 A) fuse, and recheck.■
NO -
Reinstall the checked fuse, then go to Step 3 .
  1. Disconnect the VSA modulator-control unit 46P connector.
  1. Turn the ignition switch ON (II).
  1. Measure the voltage between VSA modulator-control unit 46P connector terminal No. 40 and body ground.
Is there battery voltage?
YES -
Go to Step 6 .
NO -
Repair open in the wire between the No. 4 (7.5 A) fuse in the under-dash fuse/relay box and the VSA modulator-control unit.■
  1. Turn the ignition switch OFF.