Wheel Alignment
  1. Raise the front of the vehicle, and support it with safety stands in the proper locations, .
  1. Remove the front wheels.
  1. Loosen the damper pinch bolts (A), and adjust the camber angle by moving the bottom of the damper within the range of the damper pinch bolt free play.
  1. Tighten the damper pinch bolts to the specified torque. Make sure the damper pinch bolts tightening torque.
  1. Reinstall the front wheels. Lower the front of the vehicle to the ground, and bounce the front of the vehicle up and down several times to settle the suspension.
  1. Measure the camber angle.
    • If the measurement is within specification, check the toe.
    • If the measurement is not within specification, go to Step 7 .
  1. Raise the front of the vehicle, and support it with safety stands in the proper locations.
  1. Remove the front wheels.