Install the engine undercover.

Install the front wheels.

Install the battery. Clean the battery posts and cable terminals with sandpaper, then assemble them, and apply grease to prevent corrosion.

Check that the transmission shifts into gear smoothly.

Do the fuel system bleed procedure.

Refill the engine with engine oil.

Refill the transmission with fluid.

Refill the expansion tank with engine coolant, and bleed air from the cooling system with the heater valve open.

Do the ECM reset procedure.

Inspect the idle speed.

Check the wheel alignment.

Set the clock.

Do the headlight leveling procedure (with HID).