Crankshaft Pulley Removal and Installation
  1. Install the crankshaft pulley, and hold the pulley with handle (A) and holder attachment (B).
  1. Tighten the bolt to 29 N·m (3.0 kgf·m, 22 lbf·ft) with a torque wrench and 19 mm socket (C). Do not use an impact wrench. If you are using a new pulley bolt or new crankshaft, tighten the bolt to 34 N·m (3.5 kgf·m, 25 lbf·ft).
  1. Tighten the pulley bolt an additional 90 °.
  1. Install the drive belt.
  1. Install the engine undercover.
  1. Install the right front wheel.