M/T Change Lever Assembly Disassembly/Reassembly
  1. Remove the spring pins (A) from the select lever (B).
    NOTE: Install the spring pins into the interlock with the groove of the spring pins at the angle shown.
  1. Remove the select lever from the shift arm cover (C), then remove the shift piece (D) and the interlock (E).
  1. Remove the oil seal (F).
  1. Install in the reverse order of removal.
  1. Remove the dirt and oil from the sealing surface. Apply liquid gasket (P/N 08C70-K0234M) to the sealing surface.
    NOTE: Do not install components if too much time has passed after applying the liquid gasket (for P/N 08C70-K0234M, no more than 4 minutes, for all others, no more than 5 minutes). Instead, remove the old residue and reapply the liquid gasket.