M/T Countershaft Reassembly
  1. Measure the clearance between the old bearing (A) and the 32 mm shim (B) with a feeler gauge (C).
    Standard:
    0.04−0.10 mm (0.016−0.0039 in.)

  1. If the clearance is more than the standard, select a new shim from the following table. If the clearance measured in Step 17 is within the standard, replace only the new ball bearing.

    32 mm Shim

    Part Number
    Thickness
    A
    23971-RPF-000
    1.56 mm (0.061 in.)
    B
    23972-RPF-000
    1.60 mm (0.063 in.)
    C
    23973-RPF-000
    1.64 mm (0.065 in.)
    D
    23974-RPF-000
    1.68 mm (0.066 in.)
    E
    23975-RPF-000
    1.72 mm (0.068 in.)
    F
    23976-RPF-000
    1.76 mm (0.069 in.)
    G
    23977-RPF-000
    1.80 mm (0.071 in.)
    H
    23978-RPF-000
    1.84 mm (0.072 in.)
    J
    23979-RPF-000
    1.88 mm (0.074 in.)
    K
    23980-RPF-000
    1.92 mm (0.076 in.)
    L
    23981-RPF-000
    1.96 mm (0.077 in.)
    M
    23982-RPF-000
    2.00 mm (0.079 in.)
    N
    23983-RPF-000
    2.04 mm (0.080 in.)
    P
    23984-RPF-000
    2.08 mm (0.082 in.)
    Q
    23985-RPF-000
    2.12 mm (0.083 in.)
    R
    23986-RPF-000
    2.16 mm (0.085 in.)
    S
    23987-RPF-000
    2.20 mm (0.087 in.)
    T
    23988-RPF-000
    2.24 mm (0.088 in.)
    U
    23989-RPF-000
    2.28 mm (0.090 in.)
    V
    23990-RPF-000
    2.32 mm (0.091 in.)