Throughly clean the spring washer (A) and washer (B) before installing them on the ball bearing (C). Note the installation direction of the spring washer.

Install the 3rd/4th synchro hub, the distance collar, the 5th synchro hub, the distance collar, and ball bearing on the mainshaft.

NOTE: Refer to the mainshaft reassembly Exploded View.

Install the mainshaft in the clutch housing.

Place the transmission housing over the mainshaft and onto the clutch housing.

Secure the clutch and transmission housings with several 8 mm bolts.

NOTE: It is not necessary to use sealing agent between the housings for this procedure.

Light tap the mainshaft with a plastic hammer.