Engine Oil Pump Overhaul
Installation
  1. Check the oil pump oil seal for damage. If the oil seal is damaged, replace the oil seal.
  1. Remove all of the old liquid gasket from the oil pump mating surfaces, bolts, and bolt holes.
  1. Clean, and dry the oil pump mating surfaces.
  1. Apply liquid gasket, P/N 08C70-K0234M, 08C70-K0334M or 08C70-X0331S, evenly to the engine block mating surface of the oil pump.
  1. Apply liquid gasket to the engine block upper surface contact areas (A) on the oil pump, and lower block upper surface contact areas (B) on the oil pump.